Pipe Rail Fittings

Pipe Rail Fences are often used as an ornamental yet economical means of code compliance for handicap ramps, stairways and platforms.

They are all recreated from original 19th Century industrial designs.

Please check to see if a pipe rail system will meet with your code requirements.

We offer the following information and products.

Pipe Rail Fences are made up of the following different components:

Tee(s)

One bottom opening for 2″ nominal pipe post – Two opposite side openings for 1.5″ nominal pipe rails.

These can be modified for corner conditions and end conditions.

Cross(es)

One top and one bottom opening for 2 ” nominal pipe post – Two opposite side openings for 1.5″ nominal pipe rails.

These can be modified for corner conditions and end conditions.

Flange(s)

One through hole for 2″ nominal pipe post, 4 holes provided for fasteners.

Pipe

The pipe used in these railings can be purchased from nearly any steel supplier.

If you are unable to locate such a vendor, you may purchase these through Architectural Iron Company.

• Horizontal Rails 1.5″ Nominal Pipe. 1.9″ Outside Diameter.
• Vertical Posts 2″ Nominal Pipe. 2.375″ Outside Diameter.

Plug(s)

Used to ‘Fill In’ any opening sized for the 1.5″ nominal pipe where pipe is not required.

This item may be used to limit customizing’ charges on the Tees and Crosses.

Cast Iron Posts

Optional Items

The following items are intended for the optional use of 1.5″ nominal pipe as both the horizontals and verticals.

If you are unsure as to compatibility with our other components, please contact us.